Cisco SRW2008P User Guide - Page 55

Chapter 5 Advanced Configuration performed via HMAC-SHA-96 authentication. Password Define the local user password. Local user passwords can contain up to 159 characters. Authentication Key Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The authentication and privacy keys are entered to define the authentication key. If only authentication is required, 16 bytes are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or a colon. Privacy Key Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are defined. If both privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or colon. The Add to List button adds the Group Membership configuration to the respective table at the bottom of the screen. SNMP > Communities The Communities screen contains three areas, Communities, Basic Table and Advanced Table. Basic Enables SNMP Basic mode for a selected community and contains the following fields: Access Mode Defines the access rights of the community. The possible field values are: •• Read Only Management access is restricted to readonly, and changes cannot be made to the community. •• Read Write Management access is read-write and changes can be made to the device configuration, but not to the community. •• SNMP Admin User has access to all device configuration options, as well as permissions to modify the community. View Name Contains a list of user-defined SNMP views. Advanced Enables SNMP Advanced mode for a selected community and contains the following fields: Group Name Defines advanced SNMP communities group names. The Add to List button adds the Communities configuration to the respective Table at the bottom of the screen. Base Table Management Station Displays the management station IP address for which the basic SNMP community is defined. Community String Displays the password used to authenticate the management station to the device. Access Mode Displays the access rights of the community. View Name Displays the user-defined SNMP view. SNMP > Communities SNMP Management Station Defines the management station IP address for which the advanced SNMP community is defined. There are two definition options: •• Define the management station IP address. •• All Includes all management station IP addresses. Community String Defines the password used to authenticate the management station to the device. 8-Port 10/100/1000 Gigabit Switch with Webview SNMP > Table 49