Cisco SRW2008P User Guide - Page 52
Multicast > Bridge Multicast, Multicast > Bridge Multicast Forward All, SNMP > Global
UPC - 745883571024
View all Cisco SRW2008P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 5 Advanced Configuration Leave Timeout Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The Leave Timeout value is either user-defined, or an immediate leave value. The default timeout is 10 seconds. Multicast > Bridge Multicast •• Dynamic Indicates the port is configured dynamically. •• Forbidden Forbidden ports are not included the Multicast group, even if IGMP snooping designated the port to join a Multicast group. •• None The port is not configured for Multicast service. The Add to List button adds the configured RMON event to the Event Table at the bottom of the screen. Multicast > Bridge Multicast Forward All Multicast > Global Settings The Bridge Multicast screen displays the ports and LAGs attached to the Multicast service group in the Ports and LAGs tables. The Port and LAG tables also reflect the manner in which the port or LAGs joined the Multicast group. Ports can be added either to existing groups or to new Multicast service groups. The Bridge Multicast screen permits new Multicast service groups to be created. The Bridge Multicast screen also assigns ports to a specific Multicast service address group. The Bridge Multicast screen is divided into two areas, Configuring Multicast and Multicast Table. The fields are the same for both areas. VLAN ID Identifies a VLAN to be configured to a Multicast service. Bridge Multicast Address Identifies the Multicast group MAC address/IP address. Bridge IP Multicast DIsplays the port that can be added to a Multicast service. LAG Displays LAG that can be added to a Multicast service. The configuration options are as follows: •• Static Indicates the port is user-defined. 8-Port 10/100/1000 Gigabit Switch with Webview Multicast > Multicast Forward All The Bridge Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are forwarded to the appropriate port or VLAN. The Bridge Multicast Forward All screen contains the following fields: VLAN ID DIsplays the VLAN for which Multicast parameters are displayed. The configuration options are as follows: •• None The port is not configured for Multicast service. •• Forbidden Forbidden ports are not included the Multicast group, even if IGMP snooping designated the port to join a Multicast group. •• Static Indicates the port is user-defined. •• Dynamic Indicates the port is configured dynamically. SNMP > Global Parameters The Global Parameters screen contains parameters for defining SNMP notification parameters. 46