Cub Cadet ZT1 42 FAB Operation Manual - Page 21

SERVICE AND MAINTENANCE WARNING Before performing any type of maintenance/service, disengage all controls and stop the engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting. Always wear safety glasses during operation or while performing any adjustments or repairs. Follow the maintenance schedule given below. This chart describes service guidelines only. Refer to the Engine Operator's Manual for engine maintenance items listed in the table below. NOTE: Maintenance schedule continues onto the next page. Before Each Use After First 5 Hours Every 10 Hours Every 25 Hours Every 50 Hours Every 100 Hours Every 200 Hours Prior to Storing See Engine Manual P Check/Clean Engine Intake Screens & Cooling Fans # Check/Clean Exhaust Manifold, Muffler Pipe, & Muffler Shields # P Check/Clean Top and Underside of Deck, Under & Around Spindle P Covers, Belt Area # Check/Clean Around Fuses, Wiring & Wiring Harnesses # P Check/Clean Around Transmission, Axle & Fans # P Check/Add/Change Transmission Fluid As Needed Check Air Filter for Dirty, Loose or Damaged Parts P Check Engine Oil Level P Clean Battery Terminals Grease All Lubrication Points Check Engine Intake Screen/Clean As Needed Check Blades/Sharpen or Replace As Needed Check Tire Pressure Check/Clean Underside of Deck P Check Safety Interlock System Check Mower Blade Stop Time Inspect & Lube Deck Wheels Check Deck Level/Pitch Check Belts & Pulleys for Damage/Wear P P P P P P P P P P P 21 P P P P P P P P P P P P P P P