Dell 1100 Laser Mono Printer Dell™ Laser Printer 1100 User's Guide - Page 73
Start, Settings, Printers, Dell Laser Printer 1100, Properties, Details, Spool Settings, Paper Tray .
View all Dell 1100 Laser Mono Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
• The front or top cover is not closed. • Paper is jammed. • No paper is loaded. • A toner cartridge is not installed or the installed toner cartridge is not the correct type. • Close the corresponding cover. • Clear the paper jam. See "Clearing Jams in the Paper Tray" . • Load paper. See "Loading Paper" • Install a toner cartridge. See "Replacing the Toner Cartridge" . The printer may be in Manual Feed mode and out of paper. Add paper to the tray and press on the printer's operator panel to begin printing. The connection cable between the computer Disconnect the printer cable and reconnect it. and the printer is not connected properly. The connection cable between the computer If possible, attach the cable to another computer that is and the printer is defective. working properly and print a job. You can also try using a different printer cable. The port setting is incorrect. Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the printer is attached to the correct one. The printer may be configured incorrectly. The printer driver may be incorrectly installed. Check the printer properties to ensure that all print settings are correct. Reinstall the printer driver; see "Installing Dell Software" . Try printing a demo page. The printer is malfunctioning. Check the LEDs on the operator panel to determine if the printer is indicating a system error. Paper does not feed into the printer. Paper has not been loaded correctly. There is too much paper in the tray. The paper is too thick. Printing is extremely slow. The job may be very complex. Remove paper from the tray and reload it correctly. Remove excess paper from the tray. Use only paper that meets the specifications required by the printer. Reduce the complexity of the page or try adjusting the print quality settings. The maximum print speed of the printer is 14(A4) or 15(Letter) pages per minute. If you are using Windows 98/Me, the Spooling Setting may be set incorrectly. From the Start menu, choose Settings and Printers . Right-click Dell Laser Printer 1100 , choose Properties , click the Details tab, and then choose the Spool Settings button. Select the desired spool setting. Half the page is blank. The page layout is too complex. The page orientation setting may be incorrect. Simplify the page layout and remove any unnecessary graphics from the document. Change the page orientation in your application. The paper size and the paper size settings Ensure that the paper size selected in the print settings do not match. matches the paper in the tray. The paper There is too much paper in the paper tray. Remove excess paper from the tray. keeps If printing on special materials, use the manual feed