Dell Brocade G620 Brocade 8.0.1 Fabric OS Troubleshooting and Diagnostics Guid - Page 21
Gathering additional information, Table 3, Connectivity, Firmware Download Errors, ISL Trunking - emc
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Introduction - HBA driver version - Configuration settings ∙ Storage information: - Disk/tape type - Disk/tape firmware level - Controller type - Controller firmware level - Configuration settings - Storage software (such as EMC Control Center, Veritas SPC, and so on.) ∙ If this is a Brocade DCX 8510 or X6 family enterprise-class platform, are the CPs in-sync? Yes or no. Use the haShow command to determine the answer. ∙ List out when and what were the last actions or changes made to the switch, the fabric, and the SAN or metaSAN. ∙ In Table 3 , list the environmental changes added to the network. TABLE 3 Environmental changes Type of Change Date when change occurred Gathering additional information The following features that require you to gather additional information. The additional information is necessary in order for your switch support provider to effectively and efficiently troubleshoot your issue. Refer to the chapter or document specified for the commands used for the data you must capture: ∙ Configurations, refer to Connectivity on page 35. ∙ Firmware download, refer to Firmware Download Errors on page 55. ∙ Trunking, refer to ISL Trunking on page 73. ∙ Zoning, refer to Zoning on page 75. ∙ FCIP tunnels, refer to the Fabric OS FCIP Administrator's Guide. ∙ FICON, refer to the FICON Administrator's Guide. Brocade Fabric OS Troubleshooting and Diagnostics Guide 53-1004126-01 21