Dell Brocade G620 Brocade 8.0.1 Fabric OS Troubleshooting and Diagnostics Guid - Page 95
System message log, Displaying the system message log with no breaks
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Diagnostic Features 1 Ok 28 82 2 Ok 16 60 3 Ok 18 64 Information is displayed for each temperature sensor in the switch. The possible temperature status values are: ∙ OK: Temperature is within acceptable range. ∙ FAIL: Temperature is outside of acceptable range. Damage might occur. Refer to the hardware reference manual for your switch to determine the normal temperature range. System message log The system message log (RASlog) feature enables messages to be saved across power cycles and reboots. The Brocade DCX 8510 and X6 family enterprise-class platforms maintain independent and separate RASlogs for each of the two CP blades. Because all RASlog messages are routed to the Active CP, the message CPU ID is added as part of the RASlog message attribute. RASlog message attribute SLOT is defined to identify the CPU that generated the message. For example, in the following message, the identifier SLOT 6 means the message was generated from the slot 6 blade main CPU: 2001/01/07-04:03:00, [SEC-1203], 2,SLOT 6 | FFDC | CHASSIS, INFO, C08_1, Login information: Login successful via TELNET/SSH/RSH. IP Addr: 192.168.38.2050 In the following message the identifier SLOT 6/1 means the message was generated from the slot 6 blade co-CPU. 2001/01/07-04:03:00, [SEC-1203], 2, SLOT 6/1 , | FFDC | CHASSIS, INFO, C08_1, Login information: Login successful via TELNET/SSH/RSH. IP Addr: 192.168.38.2050 Because RASlog supports Virtual Fabrics and logical switches, the FID (Fabric ID) displays on every RASlog message to identify the source of the logical switch that generates the message. The FID can be a number from 0 to 128, and the identifier CHASSIS depends on the instance that generates the message and that it was generated by a chassis instance. The identifier FID 128 means the message was generated by the default switch instance. 2008/08/01-00:19:44, [LOG-1003], 1, SLOT 6 | CHASSIS, INFO, Silkworm12000, The log has been cleared. 2008/09/08-06:52:50, [FW-1424], 187, SLOT 6 | FID 128, WARNING, Switch10, Switch status changed from HEALTHY to DOWN. For details on error messages, refer to the Fabric OS Message Reference. Displaying the system message log with no page breaks 1. Connect to the switch and log in as admin. 2. Enter the errDump command. Displaying the system message log one message at a time 1. Connect to the switch and log in as admin. 2. Enter the errShow command. Brocade Fabric OS Troubleshooting and Diagnostics Guide 53-1004126-01 95
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-troubleshooting-diagnostics-guide-6420577/95.png)