Dell Brocade G620 Brocade 8.0.1 Fabric OS Troubleshooting and Diagnostics Guid - Page 66
Gathering additional information, FIPS
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Security Symptom SNMP management station server is unable to receive traps from fabric. If you continue to have problems, collect the data in the next section and contact your switch support provider. Gathering additional information In addition to supportSave , gather the MIB browser snapshot with the problem (like Adventnet screen snapshot) for an MIB variable. FIPS This section describes symptoms with associated causes and recommended actions for problems related to FIPS. Symptom Probable cause and recommended action When FIPS is turned on, the switch constantly reboots. When FIPS is turned on, the switch runs conditional tests each time it is rebooted. These tests run random number generators and are executed to verify the randomness of the random number generator. The conditional tests are executed each time prior to using the random number provided by the random number generator. The results of all self-tests, for both power-up and conditional, are recorded in the system log or are output to the local console. This includes logging both passing and failing results. If the tests fail on your switch, it constantly reboots. Because boot PROM access is disabled, you are not able to exit out of the reboot. You must send the switch back to your switch service provider for repair. Brocade Fabric OS Troubleshooting and Diagnostics Guide 66 53-1004126-01