Dell Brocade G620 Brocade 8.0.1 Fabric OS Troubleshooting and Diagnostics Guid - Page 70
A port or ports is already in the current switch., You may not move a port to the same switch.
 |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action Symptom Probable cause and recommended action 70 Virtual Fabrics Given slot number is not valid on this platform. You are specifying a slot number that is not valid on the platform., for example, slot 0 on a Brocade X6-8 or slot 12 on a Brocade X6-4. Slot must be enabled to configure ports. You may only attempt to configure ports on enabled blades (blades may be faulted). Unable to determine slot type. The slot type is not known to the logical switch. Verify the slot and try again. There are no ports on this slot There are no configurable ports on the slot indicated by the lsCfg command. Verify the ports and try again. Unable to remove ports from their current switch. When moving ports to a switch, you must first remove them from the switch in which they reside. This error message is displayed if this step fails. A non-GE blade is within the slot range. You are attempting to configure a GE port on a slot that does not contain GE ports. A port or ports is already in the current switch. You may not move a port to the same switch. The maximum number of switches for this platform has been reached. Each platform that supports Virtual Fabrics has a maximum number of logical switches that may be supported. The platform has reached this limit. Director platforms support 8 logical switches and fixed-port switches support 4 logical switches with Fabric OS 8.0.1 and later. Unable to create the switch. There was an error while creating the switch. Brocade Fabric OS Troubleshooting and Diagnostics Guide 53-1004126-01
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65 -
66 -
67 -
68 -
69 -
70 -
71 -
72 -
73 -
74 -
75 -
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
 |
 |
