Dell FC4500 Reference Guide - Page 86
CAUTION, Turn off the power supply before unplugging the ac line cord
View all Dell FC4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Servicing and Upgrading a DPE 3 Top filler module Latch (one per side) A. Push the latches on both sides of the filler module towards the center. B. Pull the filler module from the slot. Figure 3-27 Removing the Top Filler Module 3. Install a power supply in the empty slot as explained on page 3-41. Removing a Power-Supply Module ! CAUTION Turn off the power supply before unplugging the ac line cord from the supply or removing the supply from the enclosure. 1. Remove the drive fan pack, as shown on page 3-35. 2. Turn off the power supply and unplug its ac line cord as shown next. 3-38 EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
3
3-38
EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
Servicing and Upgrading a DPE
Figure 3-27
Removing the Top Filler Module
3.
Install a power supply in the empty slot as explained on
page 3-41.
Removing a
Power-Supply Module
CAUTION
!
Turn off the power supply before unplugging the ac line cord from
the supply or removing the supply from the enclosure.
1.
Remove the drive fan pack, as shown on page 3-35.
2.
Turn off the power supply and unplug its ac line cord as shown
next.
Latch
(one per side)
Top filler module
A.
Push the latches on both sides of the
filler module towards the center.
B.
Pull the filler module
from the slot.