Dell FC4500 Reference Guide - Page 95
Drive Type, SP Optical Cabling, LCC Copper Cabling, Standards Certification and Compliance, as follows
View all Dell FC4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Technical Specifications and Operating Limits A Drive Type SP Optical Cabling 3.5-inch drives, Fibre Channel interface, 2.54 cm (1.0-inches) or 4.06 cm (1.6-inches) tall. The SP optical cable interface to the external Fibre Channel environment is as follows: LCC Copper Cabling Type Length Bend radius 50 µm or 62.5 µm, multi-mode, dual SC 50 µm: 2 m (6.6 ft) minimum to 500 m (1,650 ft) maximum 62.5 µm: 2 m (6.6 ft) min to 300 m (985 ft) maximum 3 cm (1.2 in) minimum The DPE's LCC expansion port interface to the DAE is copper cable as follows: Type Length Shielded, 150Ω differential, shield bonded to DB-9 plug connector shell (360×) FC-AL Standard, Revision 4.4 or higher 0.3 m (1 ft) min, 10 m (33 ft) max unequalized between DPE and DAEs Standards Certification and Compliance A stand-alone DPE will be tested and certified for compliance with the international environmental and safety specifications listed next. Each DPE will be marked to indicate such compliance and certification as required. Technical Specifications A-3