Dell Latitude E6400 XFR Service Manual - Page 23
Replacing the Bottom Access Panel
View all Dell Latitude E6400 XFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Dell™ Latitude™ E6400 XFR Service Manual NOTE: No snaps are used to attach the bottom access panel to the base. There is a gasket attached to the perimeter of the bottom access panel, and this gasket might provide some resistance during removal. 3 2 1 1 M2.5 x 5mm screws (21) 2 Bottom of computer 3 Battery release slider latches (2) 4.2 Replacing the Bottom Access Panel 1. Position the Bottom Access Panel into place. NOTE: Ensure the battery release slider latches on the bottom access panel are in their locked positions. See photo below for correct slider latches positions. Battery release latches in locked position 1. Replace and tighten the twenty-one M2.5 x 5-mm screws in the sequence identified below. Page 23
Dell
™
Latitude™ E6400 XFR Service Manual
Page 23
NOTE:
No snaps are used to attach the bottom access panel to the base.
There is a gasket
attached to the perimeter of the bottom access panel, and this gasket might provide some
resistance during removal.
1
M2.5 x 5mm screws (21)
2
Bottom of computer
3
Battery release slider latches (2)
4.2
Replacing the Bottom Access Panel
1.
Position the Bottom Access Panel into place.
NOTE:
Ensure the battery release slider latches on the bottom access panel are in their locked
positions. See photo below for correct slider latches positions.
Battery release latches in locked position
1.
Replace and tighten the twenty-one M2.5 x 5-mm screws in the sequence identified below.
1
2
3