Dell Latitude E6400 XFR Service Manual - Page 31
RF Passthru Board
View all Dell Latitude E6400 XFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Dell™ Latitude™ E6400 XFR Service Manual 9 RF Passthru Board 9.1 Removing the RF Passthru Board CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. 1. Follow the procedures in Before Working on Your Computer. 2. Remove the bottom access panel (see Removing the Bottom Access Panel). 3. Disconnect the 5 antenna connections from the RF Passthru board. 4. Gently lift the lower-right corner of the RF Passthru board, and remove the RF Passthru board by sliding it out of the chassis socket. 9.2 Replacing the RF Passthru Board 1. Slide the RF Passthru into the chassis socket as shown. 2. Gently press the edge of the RF Passthru board to ensure a secure fit to the base assembly. Page 31