Dell Latitude E6400 XFR Service Manual - Page 34
Processor Module
View all Dell Latitude E6400 XFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Dell™ Latitude™ E6400 XFR Service Manual 1 3 2 1 Captive screws (4) 2 Radiator 3 Processor plate 11.2 Replacing the Processor Heatsink Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. 1. Place the radiator into the computer at an angle and set the processor plate in place. 2. Align the four captive screws on the processor plate with the screw holes on the system board. 3. In sequential order, tighten the four captive screws to secure the processor plate to the system board. 4. Replace the fan and bottom access panel (see Replacing the Fan Assembly). 5. Follow the procedures in After Working on Your Computer. 12 Processor Module 12.1 Removing the Processor Module CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the bottom access panel, fan assembly and processor heatsink assembly (see Removing the Processor Heatsink Assembly). Page 34