Dell Latitude E6400 XFR Service Manual - Page 58
Removing the 1394 Card
View all Dell Latitude E6400 XFR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Dell™ Latitude™ E6400 XFR Service Manual instructions that shipped with your computer. 1. Insert the card extender into the card connector on the system board. 2. Rotate the retainer clips over the card connector and press the extender card into the socket. The extender is inserted properly if the white line on the PCB lines up with the metal cage of the system board connector. 3. Seat the retainer clips. 4. Replace the system board (see Replacing the System Board). 28 1394 Card 28.1 Removing the 1394 Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the card cage (see Removing the Card Cage). 3. Remove the two M2 x 3-mm screws. 4. Lift the 1394 card up at an angle to remove it. 1 Page 58 2 4 3 1 1394 cable connection to system board 2 M2 x 3-mm screws (2) 3 1394 card 4 1394 cable