Dell PowerConnect Brocade M6505 Brocade 7.1.0 Access Gateway Administrator's G - Page 102
Troubleshooting Continued
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
A Troubleshooting TABLE 12 Problem Troubleshooting (Continued) Cause Solution Access Gateway is mode Access Gateway must be disabled. not wanted "Login Rejected by FC stack" messages on console may be seen during F_Port and N_Port disruptions on Brocade 8000 in Access Gateway mode. The CNA host is retrying a login before the switch has finished precessing a previous fabric logout (LOGO) attempt. "Login Rejected by FC stack" messages on console may be seen during F_Port and N_Port disruptions on Brocade IB 8470 in AG mode. The CNA host is retrying a login before the switch has finished precessing a previous fabric logout (LOGO) attempt. Disable switch using the switchDisable command. Disable Access Gateway mode using the ag --modeDisable command. Answer yes when prompted; the switch reboots. Log in to the switch. Display the switch settings using the switchShow command. Verify that the field switchMode displays Fabric OS Native mode. Messages display as designed. After the switch has completed LOGO processing, it will accept another login. Messages display as designed. After the switch has completed LOGO processing, it will accept another login. 82 Access Gateway Administrator's Guide 53-1002743-01