Dell PowerConnect Brocade M6505 Brocade 7.1.0 Access Gateway Administrator's G - Page 31
Access Gateway hardware considerations
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Access Gateway hardware considerations 1 TABLE 4 Port type Port configurations Available on Access Gateway? Available on Fabric switch? F_Port N_Port E_Port D_Port Yes Connects hosts and targets to Access Gateway. Yes Connects devices, such as hosts, HBAs, and storage to the fabric. Yes Connects Access Gateway to a fabric NA N_Ports are not supported. switch. NA ISL is not supported.1 Yes Connects the switch to other switches to form a fabric. Yes Allows diagnostic testing across link Yes Allows diagnostic testing across link to to connected AG or fabric switch. connected AG switch. 1. The switch is logically transparent to the fabric, therefore it does not participate in the SAN as a fabric switch. Access Gateway hardware considerations Hardware considerations for Access Gateway are as follows: • Access Gateway is supported on the switch platforms and embedded switch platforms listed in "Supported hardware and software" on page xiv. • Loop devices are not supported. • Direct connections to SAN target devices are only supported if the AG-enabled module is connected to a fabric. Access Gateway Administrator's Guide 11 53-1002743-01