Dell PowerConnect Brocade M6505 Brocade 7.1.0 Access Gateway Administrator's G - Page 99
Rejoining Fabric OS switches to a fabric, Reverting to a previous configuration
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Rejoining Fabric OS switches to a fabric 4 5. Enter the following commands to save the MDS switch connection: copy run start Your Cisco switch is now ready to connect to a switch in Access Gateway mode. Rejoining Fabric OS switches to a fabric When a switch reboots after AG mode is disabled, the Default zone is set to no access. Therefore, the switch does not immediately join the fabric to which it is connected. Use one of the following methods to rejoin a switch to the fabric: • If you saved a Fabric OS configuration before enabling AG mode, download the configuration using the configDownload command. • If you want to rejoin the switch to the fabric using the fabric configuration, use the following procedure. To rejoin the Fabric OS switch to a fabric, perform the following steps: 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchDisable command to disable the switch. 3. Enter the defZone --allAccess command to allow the switch to merge with the fabric. 4. Enter the cfgSave command to commit the Default zone changes. 5. Enter the switchEnable command to enable the switch and allow it to merge with the fabric. The switch automatically rejoins the fabric. Reverting to a previous configuration 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchDisable command to disable the switch. 3. Enter the configDownload command to revert to the previous configuration. 4. Enter the switchEnable command to bring the switch back online. The switch automatically joins the fabric. Access Gateway Administrator's Guide 79 53-1002743-01