Dell PowerConnect FCS624S Web Management Interface User Guide - Page 104
Configuring a trap, Con gt; System > Management > Trap, Apply, Reset
View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
4 Configuring a TACACS/TACACS+ server FIGURE 75 Add a Log Server The System Log Server display contains the following information. Server IP Address Server Udp Port Add Delete Reset Show Log Server Show System Log Displays the IP address of IPv4 or IPv6. This parameter specifies the application port used for the Syslog facility. The default is 514. Allows you to add the server IP Address. Allows you to delete the changes made. To undo your changes, click Reset. Displays the Log Server entries. Clicking this displays the default screen of the system log. Configuring a trap Select Configure > System > Management > Trap to configure a trap. Click Apply to save the configuration or click Reset to undo changes. 94 PowerConnect B-Series FCX Web Management Interface User Guide 53-1002268-01