Dell PowerConnect FCS624S Web Management Interface User Guide - Page 29
Monitoring a stack module
View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Monitoring a stack module 3 Monitoring a stack module Select Monitor > Stack > Module to view current information about Stack Modules. FIGURE 16 Monitor stack modules The Stack Module contains the following information. Stack Unit: Slot Module Status Ports Starting MAC Defines the number of the unit within the stack and the slot number. The device description. Status options are: • OK - The module came up and is operating normally. • CFG - The module is configured, but does not physically exist within the units of the stack. The number of ports on the module. The MAC address of the module. PowerConnect B-Series FCX Web Management Interface User Guide 19 53-1002268-01
PowerConnect B-Series FCX Web Management Interface User Guide
19
53-1002268-01
Monitoring a stack module
3
Monitoring a stack module
Select
Monitor > Stack > Module
to view current information about Stack Modules.
FIGURE 16
Monitor stack modules
The Stack Module contains the following information.
Stack Unit: Slot
Defines the number of the unit within the stack and the
slot number.
Module
The device description.
Status
Status options are:
•
OK – The module came up and is operating normally.
•
CFG – The module is configured, but does not
physically exist within the units of the stack.
Ports
The number of ports on the module.
Starting MAC
The MAC address of the module.