Dell PowerConnect FCS624S Web Management Interface User Guide - Page 43

Monitoring STP

Get Dell PowerConnect FCS624S PDF manuals and user guides View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

FIGURE 26 Monitor - Management port realtime information Monitoring STP 3 The realtime management port contains the following information. Status MAC Address Actual Speed/Mode Connector The status of the port. The MAC address of the port. Shows whether the actual speed matches the configured speed. If the configured speed is set to Auto, then the speed is provided. The physical type of connector. Monitoring STP The Spanning Tree Protocol (STP) eliminates Layer 2 loops in networks, by selectively blocking some ports and allowing other ports to forward traffic, you can configure based on global (bridge) and local (port) parameters. PowerConnect devices support standard STP as described in the IEEE 802.1D specification. To view current STP information for a stack unit, select Monitor > STP. From the STP display, select stack unit ID from the drop-down list, and click Display. The following information appears. PowerConnect B-Series FCX Web Management Interface User Guide 33 53-1002268-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
PowerConnect B-Series FCX Web Management Interface User Guide
33
53-1002268-01
Monitoring STP
3
FIGURE 26
Monitor - Management port realtime information
The realtime management port contains the following information.
Monitoring STP
The Spanning Tree Protocol (STP) eliminates Layer 2 loops in networks, by selectively blocking
some ports and allowing other ports to forward traffic, you can configure based on global (bridge)
and local (port) parameters. PowerConnect devices support standard STP as described in the IEEE
802.1D specification.
To view current STP information for a stack unit, select
Monitor > STP
. From the STP display, select
stack unit ID from the drop-down list, and click
Display
. The following information appears.
Status
The status of the port.
MAC Address
The MAC address of the port.
Actual Speed/Mode
Shows whether the actual speed matches the configured speed. If the configured
speed is set to Auto, then the speed is provided.
Connector
The physical type of connector.