Dell PowerConnect FCS624S Web Management Interface User Guide - Page 126
Adding Protocol type, Change Static Members
View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4 Configuring VLAN Protocol_VLAN_Name Protocol Type Selected Port Members Change Static members Change Exclude members Clear Add Modify Delete Reset Show Protocol IP Subnet Enter the name of the Protocol VLAN. Select a protocol type. Displays the selected port members under the static port and exclude port. Allows you to select the static port members. Allows you to select the exclude port members. Allows you to unselect the selected port members. Enables you to add the protocol types. Enables you to modify the changes. Enables you to delete the added protocol types. To undo your changes, click Reset. Displays the Protocol VLAN entries. Displays the VLAN protocol. Displays the IP Address and mask for VLAN protocol. FIGURE 95 Adding Protocol type Click Change Static Members to view the Static port members as shown in Figure 96. 116 PowerConnect B-Series FCX Web Management Interface User Guide 53-1002268-01