Dell PowerConnect FCS624S Web Management Interface User Guide - Page 88
Configuring a system module, The table shows the following information.
View all Dell PowerConnect FCS624S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4 Configuring a system module The table shows the following information. Unit Id:Module Slot Module Status Ports Starting MAC Add Module Displays the Unit Id of the management module. The Interface module / slot number. Identifies the module, by stack unit ID, module number, module type Displays the status of this module. Displays the number of ports in this module. The starting MAC address for this module Click Add Module to add a management module, as shown in Figure 59. FIGURE 59 Adding system module The Module display contains the following information. Slot Module Type Add Delete Reset Show The Interface module / slot number. Identifies the module type. Allows you to add the MAC Addresses. Allows you to delete the changes made. To undo your changes, click Reset. Displays the added module details. 78 PowerConnect B-Series FCX Web Management Interface User Guide 53-1002268-01