Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 197
Internal EE LUN state: Encrypted, Cleartext, or Disabled Data state is cleartext
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
cryptoCfg 2 - LUN number: numeric ID - LUN type: disk or tape drive, tape medium changer, tape attached medium changer, tape offline/unknown, or unsupported/other - LUN serial number: The LUN serial number - Encryption mode: encrypt or cleartext - Encryption format: (brocade) native or DF-compatible - Tape policy type: pool-based, LUN-based - Encrypt existing data: disabled or enabled - Rekey: disabled or enabled - Key life: the key life span (in days) - Volume/Pool label: the label for the tape volume or tape pool - Internal EE LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata exists on the LUN, or vice versa.) - Encryption algorithm: AES256-ECB (DF_compatible), AES256-GCM (native) or None (cleartext) - Key ID state: Read, Write, or Key ID not applicable - Key ID: The Key ID (if available) - New LUN: Yes or No - Replication LUN type: Primary or Mirror - Tape session number: numeric value - Number of uncompressed blocks: numeric value Use the --show -container -all -cfg command for configuration information on all CryptoTarget containers in the encryption group, or specify a crypto_target_container_name for information on a specified CTC. The display includes the following information: • Encryption group name: user-defined label • Number of containers: numeric value • For each container - Container name: a user-defined label - Type: tape or disk - EE node: the node WWN - EE slot: numeric value - Target: target port WWN, node WWN - VT: virtual target port WWN, node WWN - Number of hosts: numeric value - Configuration status: committed or defined - For each host: the host port WWN and the node WWN - For each VI: the virtual initiator port WWN and the node WWN - Number of LUNs: numeric value If a rekey session is in progress while the command is run, the following additional information is displayed: • LUN number: numeric ID Fabric OS Command Reference 165 53-1001764-02