Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 346

2 ficonCfg ficonCfg Synopsis Configures the specified FICON database. ficoncfg --set database port_index ficoncfg --reset database ficoncfg --help Description Use this command to configure a FICON database on a specified port. Refer to ficonShow for a description of the database content. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands:. port_index Specifies the port to be configured by its port index. Use switchShow for a listing of valid port index numbers. --set Sets the configuration entry. --reset database Resets the configuration entry to its default value. Specifies the name of the FICON database. The only database currently supported is the follwoing: LIRR Devices registered to receive link incident reports. Examples To set the LIRR database on port 5: switch:user> ficoncfg --set LIRR 5 To reset the LIRR switch:user> ficoncfg --reset LIRR See Also ficonHelp, ficonShow 314 Fabric OS Command Reference 53-1001764-02