Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 445
To enable 239 Domain ID mode in IM3, To turn Safe Zone on while in IM2
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 445 highlights
interopMode 2 -s Safe Zone Specify 1 to enable the McDATA Safe Zone feature. Specify 0 to disable the McDATA Safe Zone feature. Examples To display the current interop mode and command usage: switch:admin> interopmode --show InteropMode: McDATA Fabric ( IM2 ) Default Zone: Off Safe Zone: Off Domain Id offset: 0x20 To turn Safe Zone on while in IM2: switch:admin> interopmode --enable -safezone MCDT default/safe zone will be changed. Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Fabric ( IM2 ) Default Zone: Off Safe Zone: On Domain Id offset: 0x20 To disable interoperability mode and to verify the result: switch:admin> interopmode --disable The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: Off To enable McDATA Open Fabric mode (IM3) and to set the domain offset to 0x80. switch:admin> interopmode --enable -im3 -domainoffset 0x80 The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Open Fabric ( IM3 ) Domain Id offset: 0x80 To enable 239 Domain ID mode in IM3: switch:admin> interopmode --enable -domainoffset 0xFF The switch effective and defined configuration will be lost if interop Mode is changed. Interop Mode or Domain Offset Will Be Changed and switch will be Enabled Do you want to continue? (yes, y, no, n): [no] y InteropMode: McDATA Open Fabric ( IM3 ) Domain Id offset: 0xff Fabric OS Command Reference 413 53-1001764-02