Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 658
to be effective. Any circuit attribute you change with
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 658 highlights
2 portCfg comm_rate Specifies the committed traffic rate on the FCIP tunnel in Kbps. The valid range is 10000 Kbps to 1000000 Kbps. There is no default. Both sides of the tunnel must have matching configurations. -b |--min-comm-rate value, -B |--max-comm-rate value Alternately you can set a minimum and a maximum for the committed rate to configure the tunnel for Adaptive Rate Limiting (ARL), which allows for a more effective sharing of bandwidth between applications. The valid range is 10000 Kbps to 1000000 Kbps. The maximum committed rate can be no larger than five times the minimum committed rate, and both sides of the circuit must have matching configurations. modify [circuit_ID] [circuit_arguments] Modifies the properties of an existing FCIP circuit. To modify a circuit, you must specify at least one of the optional circuit parameters for the command to be effective. Any circuit attribute you change with the fcipcircuit modify command affects only the specified FCIP circuit. All other circuits remain unchanged. Refer to fciptunnel create and modify for a listing of optional circuit arguments and their descriptions. delete circuit_ID Deletes the specified FCIP circuit. Examples To create an FCIP tunnel (and default circuit 0) with a committed rate of 10000 Kbps on a Brocade FX8-24: switch:admin>portcfg fciptunnel 1/12 create 20.10.12.34 20.09.14.57 10000 Operation succeeded To create another FCIP circuit (circuit 1) on the same switch: switch:admin>portcfg fcipcircuit 1/12 create 1 20.10.12.35 20.09.14.60 10000 Operation succeeded switch:admin> portshow fcipcircuit 1/12 1 Circuit ID: 1/12.1 Circuit Num: 1 Admin Status: Enabled Oper Status: In Progress Remote IP: 20.10.12.35 Local IP: 20.09.14.60 Metric: 0 Min Comm Rt: 10000 Max Comm Rt: 10000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 5000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN Not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 626 Fabric OS Command Reference 53-1001764-02