Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 767
To display the mirror connections
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 767 highlights
portMirror 2 To verify that port mirroring is enabled on port 18: switch:admin> portcfgshow 18 Area Number: 18 Speed Level: AUTO(HW) Fill Word: 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port ON Credit Recovery ON F_Port Buffers OFF NPIV PP Limit: 126 CSCTL mode: OFF switch:admin> switch:admin> switchshow | grep Online switchState: Online 1 1 640100 id N2 Online 2 2 640200 id N2 Online "sw0" (downstream) 7 7 640700 id N4 Online 8 8 640800 id N2 Online 10 10 640a00 id N2 Online 11 11 640b00 id N2 Online 12 12 640c00 id N4 Online 17 17 641100 id N2 Online "sw0" (downstream) 18 18 641200 id N2 Online FC G-Port FC E-Port 10:00:00:05:1e:36:01:26 FC F-Port 20:14:00:05:1e:a2:f9:b1 FC F-Port 1 N Port + 2 NPIV public FC Mirror Port FC F-Port 21:00:00:e0:8b:10:1d:9d FC F-Port 20:15:00:05:1e:a2:f9:b1 FC E-Port 10:00:00:05:1e:a2:ec:9c FC Mirror Port To add three mirror connection between three local device port pairs to mirror port 18: switch:admin> portmirror --add 18 0x640c00 0x640800 switch:admin> portmirror --add 18 0x640700 0x640b00 switch:admin> portmirror --add 18 0x640700 0x640c00 To display the mirror connections: switch:admin> portmirror --show Number of mirror connection(s) configured: 3 Mirror_Port SID DID State 18 0x640c00 0x640800 Enabled 18 0x640700 0x640b00 Enabled 18 0x640700 0x640c00 Enabled Fabric OS Command Reference 735 53-1001764-02