Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 600

2 perfAddUserMonitor "grouplist" Offset Mask ValueList alias Specifies up to six sets of offset, mask, and ValueList, separated by semicolons (;). The entire grouplist operand must be enclosed in quotation marks. For example: "4, 0xff, 0x22; 12, 0xff, 0x01" The grouplist component values are as follows: Specifies the offset within the frame. Offset 0 is the first byte of the SOF, and offset 4 is the first byte of the frame header. The offset must be in decimal format. Valid values for offset are 0, [4-63]. Offset 0 is a special case that can be used to monitor the first four bytes SOFx frames. EOF cannot be monitored. Specifies the mask value to be applied (with the AND operator) to frame contents. Specifies up to four values that need to be captured from frame contents. The ValueList can be either hexadecimal or decimal format. SOFx frames are considered a special case. The Offset is specified as 0x0; valueList values are specified with: 0 SOFf 1 SOFc1 2 SOFi1 3 SOFn1 4 SOFi2 5 SOFn2 6 SOFi3 7 SOFn3 Specifies a name for the monitor. Strings exceeding 10 characters are truncated. To accommodate spaces, the string must be surrounded by quotation marks. Spaces count toward the character limit but are removed. This operand is optional. By default, the alias is an empty string. Examples To add a filter-based monitor for all Extended Link Service requests (R_CTL=0x22 and TYPE=0x01) to a port: switch:admin> perfaddusermonitor 1/4 "4, 0xff, 0x22; 12, 0xff, 0x01" User monitor #0 added As a special case, to add a filter-based monitor for SOFi3 to a port: switch:admin> perfaddusermonitor 1/4 "0, 0xff, 6" User monitor #1 added See Also perfAddEEMonitor, perfAddIPMonitor, perfAddReadMonitor, perfAddRWMonitor, perfAddSCSIMonitor, perfAddWriteMonitor 568 Fabric OS Command Reference 53-1001764-02