Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 811
portShow, To reset the TCIP statistics, To display the FC data path credit data
![]() |
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 811 highlights
portShow 2 |Tunnel Num| Connection|LPort|RPort| OOO | OOO H | DupACK |Rtx DupACK| | Fast Rtx | F Rtx H | Slow Rtx | InFlt H |SlowStarts| Rtx TO |Rtx Rtx TO| | 0 CONTROL 4097 3225 0 0 0 0| | 0 0 0 2 0 0 0| | 0 DATA 4098 3226 0 0 0 0| | 0 0 0 1 0 0 0| To reset the TCIP statistics: Switch:admin> portshow fciptunnel ge1 0 -snapstart Port: ge1 Tunnel ID 0 Tunnel Description "This is a test Description of this tunnel" Remote IP Addr 192.168.114.2 Local IP Addr 192.168.114.1 Remote WWN Not Configured Local WWN 10:00:00:05:1e:38:84:65 Compression off Fastwrite off Tape Pipelining off Committed Rate 900000 Kbps (0.900000 Gbps) SACK on Min Retransmit Time 100 Keepalive Timeout 10 Max Retransmissions 8 VC QoS Mapping off DSCP Marking (Control): 0, DSCP Marking (Data): 0 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 1 Uptime 5 minutes, 26 seconds TCP data and control statistics snapshots have been reset for tunnel 0 To display the FC data path credit data: switch:admin> portshow fciptunnel 9/ge0 0 -credits Slot: 9 Port: ge0 Tunnel ID 0 Tunnel Description "This is a test Description of this tunnel" Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e:39:d4:5a Compression on Fastwrite on Tape Pipelining on Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps) SACK on Fabric OS Command Reference 779 53-1001764-02
![](/manual_guide/products/dell-8-fabric-os-command-reference-manual-supporting-fabric-155f671/811.png)