Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 355

ficonShow 2 0x04 Output unit, if it is a storage port; otherwise, a reserved field for a channel port 0x05 Reserved field for a channel port. 0x06 Controller, if it is a storage port; otherwise, a reserved field for a channel port. 0x07 Terminal - Full screen if it is a storage port; otherwise, a reserved field for a channel port. 0x08 Terminal - Line mode if it is a storage port; otherwise, an emulated control unit support only. 0x09 Reserved. 0x10 Switch, if it is a switch device; otherwise, reserved. 0x0b-0xff Reserved. Byte CC 0x00 If storage CU port has registered with the switch. 0xID CHIPID if channel port has registered with the switch. 0xPN If switch has registered with the channel, PN represents the FL port number. Part Number Displays the switch chassis part number. PID Displays the 24-bit Fibre Channel port address in 0xDDAAPP format. DD is Domain ID. AA is Area ID. PP is AL_PA ID. Plant of Manufacture Displays the manufacturer plant name or code. Port Physical port number. Port Status Displays the status of the port: Link degraded but operational Link not operational Port Type Displays the port type: U is unknown. N is N_Port. NL is NL_Port. Protocol Displays whether the traffic is using FICON or FCP. Registered Node WWN Displays the device's node world wide name associated with the device HBA. Registered Port WWN Displays the device's channel or storage CU port world wide name associated with the device HBA. Sequence Number Displays the sequence number of the self-describing node. Serial Number Displays the switch serial number. Fabric OS Command Reference 323 53-1001764-02