Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 817
followed by a slash /., For bladed systems only, specify the slot number of the port to be displayed
![]() |
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 817 highlights
portStats64Show 2 swConnUnittStatRxMulticastToObjects, stat_mc_to The number of multicast timeouts. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is not supported on FCoE ports. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to be displayed, followed by a slash (/). port Specify a port number to be displayed, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. -long Displays the counters as one single 64-bit number. This operand is optional; if omitted, the lower and upper 32-bits are reported as two separate numbers. Examples To display the 64-bit hardware statistics for a port: switch:user> portstats64show 4/15 stat64_wtx 0 top_int : 4-byte words transmitted 316 bottom_int : 4-byte words transmitted stat64_wrx 0 top_int : 4-byte words received 1486 bottom_int : 4-byte words receive stat64_ftx 0 top_int : Frames transmitted 69 bottom_int : Frames transmitted stat64_frx 0 top_int : Frames received 73 bottom_int : Frames received stat64_c2_frx 0 top_int : Class 2 frames received 0 bottom_int : Class 2 frames received stat64_c3_frx 0 top_int : Class 3 frames received 37 bottom_int : Class 3 frames received stat64_lc_rx 0 top_int : Link control frames received 8 bottom_int : Link control frames received stat64_mc_rx 0 top_int : Multicast frames received 0 bottom_int : Multicast frames received stat64_mc_to 0 top_int : Multicast timeouts 0 bottom_int : Multicast timeouts stat64_mc_tx 0 top_int : Multicast frames transmitted 0 bottom_int : Multicast frames transmitted tim64_rdy_pri 0 top_int : Time R_RDY high priority 60438254 bottom_int : Time R_RDY high priority tim64_txcrd_z 0 top_int : Time BB_credit zero 2 bottom_int : Time BB_credit zero er64_enc_in 0 top_int : Encoding errors inside of frames 0 bottom_int : Encoding errors inside of frames er64_crc 0 top_int : Frames with CRC errors 0 bottom_int : Frames with CRC errors er64_trunc 0 top_int : Frames shorter than minimum 0 bottom_int : Frames shorter than minimum er64_toolong 0 top_int : Frames longer than maximum 0 bottom_int : Frames longer than maximum er_bad_eof 0 top_int : Frames with bad end-of-frame Fabric OS Command Reference 785 53-1001764-02
![](/manual_guide/products/dell-8-fabric-os-command-reference-manual-supporting-fabric-155f671/817.png)