Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 781
an FR4-18i blade. Note that the Front Domain ID is what is shown
![]() |
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 781 highlights
portShow 2 To display the state of a VE_Port on a chassis with an FX8-24 blade: switch:admin> portshow 7/12 portIndex: 140 portName: portHealth: No Fabric Watch License Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x490b PRESENT ACTIVE VIRTUAL E_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN LED portType: 12.0 portState: 1 Online Protocol: FC portPhys: 255 N/A portScn: 16 E_Port port generation number: 1048 state transition count: 26 portId: 018c00 portIfId: 43720806 portWwn: 20:8c:00:05:1e:7a:7a:00 portWwn of device(s) connected: Distance: normal switch:admin> To display port status for a GbE port on a Brocade 7800: switch:admin> portshow ge2 Eth Mac Address: 00.05.1e.54.b1.17 Port State: 1 Online Port Phys: 6 In_Sync Port Flags: 0x4003 PRESENT ACTIVE LED Port Speed: 1G To view xlate domains, you must issue the command on a Brocade 7500/7500E or a chassis with an FR4-18i blade. Note that the Front Domain ID is what is shown: switch:admin> portshow 8/4 portName: portHealth: No Fabric Watch License Authentication: None EX_Port Mode: Enabled Fabric ID: 20 Front Phantom: State: OK Cur Dom ID: 160 WWN: 50:00:51:e3:60:ee:0e:14 Pr Switch Info: Dom ID: 5 WWN: 10:00:00:05:1e:34:02:04 Fabric params: R_A_TOV: 10000 E_D_TOV: 2000 PID fmt: core Authentication Type: None Hash Algorithm: N/A DH Group: N/A Edge fabric's primary wwn: N/A Edge fabric's version stamp: N/A portDisableReason: None Fabric OS Command Reference 749 53-1001764-02
![](/manual_guide/products/dell-8-fabric-os-command-reference-manual-supporting-fabric-155f671/781.png)