Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 715
portCfgShow, To display FCIP parameters on the Brocade 7800 with IPv6 support
![]() |
View all Dell PowerEdge M610x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 715 highlights
portCfgShow 2 To display FCIP parameters on the Brocade 7800 (with IPv6 support): switch:admin> portcfgshow ge2 Mode: FCIP Persistent Disable: OFF Ipif configuration: Interface IP Address NetMask MTU 0 192.168.2.10 255.255.255.0 1500 1 192.168.2.12 255.255.255.0 1500 2 192.168.2.13 255.255.255.0 1500 3 192.168.2.11 255.255.255.0 1500 4 192.168.2.110 255.255.255.0 1500 Interface IPv6 Address Len MTU 0 20::2:10 64 1500 Iproute Configuration: IP Address Mask Gateway Metric 192.168.42.0 255.255.255.0 192.168.2.250 0 IPv6ddress Len Gateway Metric 20:42:: 64 20::2:250 0 Vlantag configuration: Interface Address VlanId L2CoS Destination Address 192.168.2.10 200 5 0.0.0.0 192.168.2.10 300 5 192.168.2.21 To display the VLAN tagging configuration only: switch:admin> portcfgshow vlantag ge2 Port: ge2 Vlantag configuration: Interface Address VlanId L2CoS Destination Address 192.168.2.20 200 5 0.0.0.0 192.168.2.21 300 5 192.168.2.10 Fabric OS Command Reference 683 53-1001764-02
![](/manual_guide/products/dell-8-fabric-os-command-reference-manual-supporting-fabric-155f671/715.png)