Dell PowerEdge M610x Fabric OS Command Reference Manual Supporting Fabric - Page 599

perfAddUserMonitor 2 perfAddUserMonitor Synopsis Adds a user-defined filter-based performance monitor. perfaddusermonitor [slot/]port "grouplist" [alias] Description Use this command to define a custom filter for frame offsets and values. For every offset, each group of comparison values is evaluated using the Boolean OR operator to determine a match. If there are multiple offsets, each resulting OR function is evaluated using the AND operator to determine if the entire statement is true, thereby incrementing the counter. Execution of this command displays a numeric key that uniquely identifies the monitor. Use the perfMonitorShow command for a listing of valid keys and user-defined aliases. Notes This command is being deprecated along with the commands listed below. Use the new fmConfig command instead. • perfAddIPMonitor • perfAddReadMonitor • perfAddRWMonitor • perfAddSCSIMonitor • perfAddWriteMonitor • perfDelFilterMonitor • perfShowFilterMonitor For the perfMonitorShow and perfMonitorClear commands, only the management of Filter Monitors is being deprecated (FLT class); these commands continue to be supported for managing classes other than Filter monitors. Management of filter-based monitors is provided through the new fmConfig interface. While the legacy commands are still operational in the Fabric OS 6.4.0 release, their use is incompatible with the new fmConfig command. Once you use the new command to configure and manage filter-based monitors, you can no longer use the old commands. The legacy commands and options will be removed in Fabric OS v6.5.0 This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). port Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Fabric OS Command Reference 567 53-1001764-02