Dell PowerEdge R910 Hardware Owner's Manual - Page 134
I/O Card, Removing the I/O Card
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
I/O Card Removing the I/O Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 If applicable, disconnect the external cables connected to the I/O card. 3 Open the system. See "Opening the System" on page 89. 4 Grasp the card by its edges and lift the card to remove it from the I/O card connector. See Figure 3-1 for the location of the I/O card in the system. 5 If applicable, remove the internal dual SD module. See "Removing the Internal Dual SD Module" on page 139. 6 If applicable, remove the iDRAC6 enterprise card. See "Removing an iDRAC6 Enterprise Card" on page 138. 134 Installing System Components