Dell PowerEdge R910 Hardware Owner's Manual - Page 151
After removing the processor, place it in an antistatic container for reuse
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board. 13 Carefully lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor. After removing the processor, place it in an antistatic container for reuse, return, or temporary storage. Do not touch the bottom of the processor. Touch only the side edges of the processor. Figure 3-30. Removing and Installing a Processor 4 5 3 2 1 6 Installing System Components 151
Installing System Components
151
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
13
Carefully lift the processor out of the socket and leave the release lever up
so that the socket is ready for the new processor.
After removing the processor, place it in an antistatic container for reuse,
return, or temporary storage. Do not touch the bottom of the processor.
Touch only the side edges of the processor.
Figure 3-30.
Removing and Installing a Processor
1
2
3
4
5
6