Dell PowerEdge R910 Hardware Owner's Manual - Page 59

Message Causes Corrective Actions The memory configuration is not optimal. The recommended memory configuration is: Invalid memory configuration. The system will run but with reduced functionality. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 92. If the problem persists, see "Troubleshooting System Memory" on page 181. Write fault Write fault on selected drive. Faulty USB device, USB Replace the USB medium or medium, optical drive device. Ensure that the USB, assembly, hard drive, or hard- SAS backplane, or SATA drive subsystem. cables are properly connected. See "Troubleshooting a USB Device" on page 174, "Troubleshooting an Internal USB Key" on page 183, and "Troubleshooting a Hard Drive" on page 186. Warning: QPI The processor has bent pins. Verify that there are no bent links operating in Slow Speed Mode. The processor is not properly pins on the processor. If the seated on the processor processor has bent pins, see socket. "Getting Help" on page 203. Warning: QPI link Reseat the processors. See between "Removing a Processor" on Port and page 148 and "Installing a