Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 1023

NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing order using SNMP. As a workaround, you can use the -C c option in snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise. 6027.3.3.3 Example Dell-1# show mac accounting destination interface gigabitethernet 2/1 Destination Out Port VLAN Packets Bytes 00:44:00:00:00:02 00:44:00:00:00:01 00:22:00:00:00:00 00:44:00:00:00:02 00:44:00:00:00:01 Gi 11/1 1000 10000 Gi 11/1 1000 10000 Gi 11/1 1000 10000 Gi 11/1 2000 10000 Gi 11/1 2000 10000 5120000 5120000 5120000 5120000 5120000 Dell-1# Related Commands • show mac accounting access-list - display the MAC access list configurations and counters (if configured). show mac learning-limit Display MAC address learning limits set for various interfaces. Syntax Parameters show mac learning-limit [violate-action] [detail] [interface interface] violate-action detail interface interface (OPTIONAL) Enter the keywords violate-action to display the MAC learning limit violation status. (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail. (OPTIONAL) Enter the keyword interface with the following keywords and the interface information: • For a port channel interface, enter the keywords port-channel then a number. • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Layer 2 1023