Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 1558

password Enter a text string, up to 96 characters long, as the clear text password. Defaults Command Modes Command History No password is configured. level = 15. CONFIGURATION This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.13(0.0) 9.10(0.1) 9.10(0.0) 9.10(0.0) Description Changed the maximum length of the password from 32 to 96. Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON, S6000, S6000-ON, S5000, S4810, S4820T, S3048-ON, S4048-ON, MXL, FN IOM, C9010, S3100, and Z9100-ON. Related Commands • show running-config - views the current configuration. • privilege level (CONFIGURATION mode) - controls access to the command modes within the switch. enable restricted Allows Dell EMC Networking technical support to access restricted commands. Syntax enable restricted [encryption-type] password To disallow access to restricted commands, use the no enable restricted command. Parameters encryption-type (OPTIONAL) Enter the number 7 as the encryption type. Enter 7 followed a text string as the hidden password. The text string must be a password that was already encrypted by a Dell EMC Networking router. Use this parameter only with a password that you copied from the show runningconfig file of another Dell EMC Networking router. password Enter a text string, up to 32 characters long, as the clear text password. Defaults Command History Not configured. This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. 1558 Security