Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 1482

To delete the filter, use the no distribute-list prefix-list-name out command. Parameters prefix-list-name interface Enter the name of a configured prefix list. (OPTIONAL) Identifies the interface type slot/port as one of the following: • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a Port Channel interface, enter the keywords port-channel then a number. • For a VLAN, enter the keyword vlan then a number from 1 to 4094. connected isis ospf static (OPTIONAL) Enter the keyword connected to filter only directly connected routes. (OPTIONAL) Enter the keyword isis to filter only IS-IS routes. (OPTIONAL) Enter the keyword ospf to filter all OSPF routes. (OPTIONAL) Enter the keyword static to filter manually configured routes. Defaults Command Modes Command History Not configured. ROUTER RIP This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.8.1.0 7.6.1.0 pre- 6.2.1.1 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on the E-Series. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1482 Routing Information Protocol (RIP)