Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 275

Version 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands • match interface - redistribute routes that match the next-hop interface. • match ip address - redistribute routes that match an IP address. • match ip route-source - redistribute routes that match routes advertised by other routers. • match metric - redistribute routes that match a specific metric. • match route-type - redistribute routes that match a route type. • match tag - redistribute routes that match a specific tag. match ip route-source To match based on the routes advertised by routes specified in IP access lists or IP prefix lists, configure a filter. Syntax match ip route-source {prefix-list prefix-list-name} To delete a match, use the no match ip route-source {prefix-list prefix-list-name} command. Parameters prefix-list prefix-list- Enter the keywords prefix-list and then enter the name of configured prefix list, up name to 140 characters. Defaults Command Modes Command History Not configured. ROUTE-MAP This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Access Control Lists (ACL) 275