Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 489

I 32.32.33.33/32 *>n 33.33.33.33/32 *>n 33.33.44.55/32 *>n 44.44.44.44/32 *>I 55.55.0.0/16 *>I 55.55.55.55/32 *>I 55.55.66.66/32 *>a 66.66.0.0/16 *>n 66.66.66.77/32 *>n 66.66.77.77/32 DellEMC# 60.0.0.2 0.0.0.0 0.0.0.0 0.0.0.0 72.1.1.2 72.1.1.2 72.1.1.2 0.0.0.0 0.0.0.0 0.0.0.0 100 0 400 500 i 0 32768 i 0 32768 i 0 32768 i 100 0 i 0 100 0 i 0 100 0 i 32768 i 0 32768 i 0 32768 i show ip bgp neighbors Allows you to view the information BGP neighbors exchange. Syntax show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast] neighbors [ip-address [advertised-routes | dampened-routes | detail | flap-statistics | routes | all {received-routes [network [network-mask]]} | {denied-routes [network [network-mask]]}] Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view information exchanged by BGP neighbors corresponding to that VRF. NOTE: You can use this attribute to view information exchanged by BGP neighbors that correspond to either a default or a non-default VRF. ipv4 multicast ipv4 unicast ipv6 unicast ip-address advertised-routes dampened-routes detail flap-statistics routes all {received-routes [network [networkmask]} (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view information related only to ipv4 multicast routes. (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view information related only to ipv4 unicast routes. (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view information related only to ipv6 unicast routes. (OPTIONAL) Enter the IP address of the neighbor to view only BGP information exchanged with that neighbor. (OPTIONAL) Enter the keywords advertised-routes to view only the routes the neighbor sent. (OPTIONAL) Enter the keywords dampened-routes to view information on dampened routes from the BGP neighbor. (OPTIONAL) Enter the keyword detail to view neighbor-specific internal information for the IPv4 Unicast address family. (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on the neighbor's routes. (OPTIONAL) Enter the keyword routes to view only the neighbor's feasible routes. (OPTIONAL) Enter the keywords all {received-routes} then either the network address alone (in dotted decimal format) or the network address along with the network mask (in slash prefix format) to view all the information received from neighbors. NOTE: Configure the neighbor soft-reconfiguration inbound command prior to viewing all the information received from the neighbors. Border Gateway Protocol 489