Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 277

Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands • match interface - redistribute routes that match the next-hop interface. • match ip address - redistribute routes that match an IP address. • match ip next-hop - redistribute routes that match the next-hop IP address. • match ip route-source - redistribute routes that match routes advertised by other routers. • match route-type - redistribute routes that match a route type. • match tag - redistribute routes that match a specific tag. match origin To match routes based on the value found in the BGP path ORIGIN attribute, configure a filter. Syntax match origin {egp | igp | incomplete} To disable matching filter, use the no match origin {igp | egp | incomplete} command. Parameters egp igp incomplete Defaults Command Modes Not configured. ROUTE-MAP Enter the keyword egp to match routes originating outside the AS. Enter the keyword igp to match routes originating within the same AS. Enter the keyword incomplete to match routes with incomplete routing information. Access Control Lists (ACL) 277