Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 138

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series and E-Series. Usage Information One trace log message is generated for each command. No password information is saved to this file. A commandhistory trace log is saved to a file after failover. Dell EMC Networking TAC analyzes this file to help identify the root cause of it. The timestamps display format of the show command-history output changes based on the service timestamps log datetime configuration. The time format can be in uptime, local time or UTC time. If timestamp is disabled (no service timestamps log), the command history time format is shown with timestamp defaults (service timestamps log datetime localtime) as in Example 4. Example Example 1: Default configuration service timestamps log datetime or service timestamps log datetime localtime DellEMC#show clock 15:42:42.804 IST Fri May 17 2019 DellEMC(conf)#service timestamps log datetime DellEMC#show command-history [May 17 15:38:55]: CMD-(CLI):[service timestamps log datetime]by default from console [May 17 15:41:40]: CMD-(CLI):[write memory]by default from console - Repeated 1 time. [May 17 15:41:45]: CMD-(CLI):[interface gigabitethernet 1/1]by default from console [May 17 15:41:47]: CMD-(CLI):[shutdown]by default from console [May 17 15:41:50]: CMD-(CLI):[no shutdown]by default from console [May 17 15:42:42]: CMD-(CLI):[show clock]by default from console [May 17 15:42:52]: CMD-(CLI):[write memory]by default from console DellEMC# Example 2: service timestamps log datetime utc DellEMC#show clock 15:47:05.661 IST Fri May 17 2019 138 Control and Monitoring