Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 1273

Parameters area area-id ipsec spi number esp encryptionalgorithm key-encryptionalgorithm key authenticationalgorithm key-encryptiontype key null Area for which OSPFv3 traffic is to be encrypted. For area-id, enter a number. The range is from 0 to 4294967295. Security Policy index (SPI) value that identifies an IPsec security policy. The range is from 256 to 4294967295. Encryption algorithm used with ESP. Valid values are: 3DES, DES, AES-CBC, and NULL. For AES-CBC, only the AES-128 and AES-192 ciphers are supported. (OPTIONAL) Specifies if the key is encrypted. Valid values: 0 (key is not encrypted) or 7 (key is encrypted). Text string used in encryption. The required lengths of a non-encrypted or encrypted key are: 3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC -32 or 64 hex digits for AES-128 and 48 or 96 hex digits for AES-192. Specifies the authentication algorithm to use for encryption. Valid values are MD5 or SHA1. (OPTIONAL) Specifies if the authentication key is encrypted. Valid values: 0 (key is not encrypted) or 7 (key is encrypted). Text string used in authentication. For MD5 authentication, the key must be 32 hex digits (non-encrypted) or 64 hex digits (encrypted). For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits (encrypted). Causes an encryption policy configured for the area to not be inherited on the interface. Defaults Command Modes Command History Not configured. ROUTER OSPFv3 This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Open Shortest Path First (OSPFv2 and OSPFv3) 1273