Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 439

Command History Version 9.10(0.0) 9.10(0.0) 9.2(1.0) 9.0.2.0 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the S3148. Introduced the all keyword on the S4810, S4820, S4048-ON, S3048-ON, S3100 series, S6010-ON, S4040T-ON, S5000, S6000, S6000-ON, S6100-ON, Z9100-ON, and Z9500. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information If you configure the set next-hop command in ROUTE-MAP mode, the configuration takes precedence over the neighbor next-hop-self command. If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reflector. If you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reflector. neighbor password Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors. Syntax neighbor {ip-address | peer-group-name} password [encryption-type] password To delete a password, use the no neighbor {ip-address | peer-group-name} password command. Parameters ip-address peer-group-name encryption-type password Enter the IP address of the router to be included in the peer group. Enter the name of a configured peer group. (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the password is encrypted and hidden. Enter a text string up to 80 characters long. The first character of the password must be a letter. You cannot use spaces in the password. Defaults Command Modes Command History Not configured. ROUTER BGP This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Border Gateway Protocol 439