Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 134

Version 9.7(0.0) 9.2(1.0) 9.0.2.0 9.0.0.0 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 6.5.1.0 Description Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Messages can contain an unlimited number of lines; however, each line is limited to 255 characters. To move to the next line, use . To send the message use CTR-Z; to abort a message, use CTR-C. service timestamps To debug and log messages, add time stamps. This command adds either the uptime or the current time and date with local time zone time difference included or excluded. Syntax service timestamps {debug | log} [datetime [localtime] [msec] [show-timezone] [utc] | uptime] To disable timestamping, use the no service timestamps [debug | log] command. Parameters Defaults datetime debug log localtime msec show-timezone uptime utc (OPTIONAL) Enter the keyword datetime to have the current time and date as in local time zone added to the message. (OPTIONAL) Enter the keyword debug to add timestamps to debug messages. (OPTIONAL) Enter the keyword log to add timestamps to log messages with severity from 0 to 6. (OPTIONAL) Enter the keyword localtime to include the local time zone time in the timestamp. (OPTIONAL) Enter the keyword msec to include milliseconds in the timestamp. (OPTIONAL) Enter the keyword show-timezone to include the time zone information in the timestamp. (OPTIONAL) Enter the keyword uptime to have the timestamp based on time elapsed since system reboot. (OPTIONAL) Enter the keyword utc to include the UTC time format (ignoring local time zone) in the timestamp. • datetime [localtime] 134 Control and Monitoring