Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.2 - Page 1358

Defaults Command Modes Command History none EXEC Privilege Version 9.11.3.0 Description Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON, S3100, S6010-ON, S3048-ON, and C9010. Related Commands show ipv6 pim tib - displays the IPv6 PIM tree information base (TIB) debug ipv6 pim Invoke IPv6 PIM debugging. Syntax debug ipv6 pim [vrf vrf-name] [bsr | events | group [group] | packet [in | out] | register [group] | state | timer [assert | hello | joinprune | register]] To disable IPv6 PIM debugging, use the no debug ipv6 pim [vrf vrf-name] command. Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view IP PIM debugging messages corresponding to that VRF. NOTE: Applies to specific VRF if input is provided, else applies to Default VRF. bsr events group [group] packet register [group] state timer [assert | hello | joinprune | register] (OPTIONAL) Enter the keyword bsr to invoke debugging of IPv6 PIM Candidate RP/BSR activities. (OPTIONAL) Enter the keyword events to invoke debugging of IPv6 PIM events. (OPTIONAL) Enter the keyword group followed by the group address to invoke debugging on that specific group. (OPTIONAL) Enter the keyword packet to invoke debugging of IPv6 PIM packets. (OPTIONAL) Enter the keyword register and optionally the group address to invoke debugging of IPv6 PIM register messages for a particular group. (OPTIONAL) Enter the keyword state to view IPv6 PIM state changes. (OPTIONAL) Enter the keyword timer to view IPv6 PIM timers. Enter one of the optional parameters: • assert: to view the assertion timer • hello: to view the IPv6 PIM neighbor keepalive timer • joinprune: to view the expiry timer (join/prune timer) • register: to view the register suppression timer Defaults Command Modes Disabled. EXEC Privilege 1358 PIM-Sparse Mode (PIM-SM)