Dell Vostro 2510 Service Manual - Page 39
Although the cables are unattached
View all Dell Vostro 2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
7. In sequential order, remove the four numbered M2.5 x 5-mm screws from the display hinges. 8. Disconnect the display cable from the display cable connector on the system board. 9. Lift the display cable and antenna cables from beneath the tabs on the palm rest. NOTICE: Ensure that the display cable and the antenna cables do not get caught beneath the plastic tabs on the palm rest. 10. Gently tug on the antenna cables to remove them from underneath the palm rest. NOTE: The antenna cables are no longer attached to the WLAN card which you removed in step 3 of this procedure. Although the cables are unattached, they can be difficult to remove from underneath the palm rest. You may want to turn the computer upside down and remove the hard drive compartment cover and memory cover in order to have better access to the antenna cables. 11. Lift the display assembly out of the computer.