Dell Vostro 2510 Service Manual - Page 46
Camera and Microphone Assembly, Replacing the Display Cable
View all Dell Vostro 2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1 display panel 2 display cable connector 3 display cable Replacing the Display Cable CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. This procedure assumes that you have completed the removal procedure Removing the Display Cable. 1. Connect the display cable to the connector on the back of the display panel. 2. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover. 3. Replace the two M2 x 5-mm screws on the display bracket. 4. Replace the display inverter (see Replacing the Display Inverter). 5. Replace the display bezel (see Replacing the Display Bezel). 6. Replace the display assembly (see Replacing the Display Assembly). 7. Replace the keyboard (see Replacing the Keyboard). 8. Replace the hinge cover (see Replacing the Hinge Cover). 9. Replace the WLAN card (see Replacing a WLAN Card). 10. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover. Camera and Microphone Assembly Removing the Camera and Microphone Assembly CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at